- MRBW-WIFI: ProtoThrottle Receiver for ESU CabControl, JMRI WiFi Throttle, and Digitrax LNWI
- LNWI: Digitrax – LocoNet WiFi Interface
https://www.digitrax.com/products/wireless/lnwi/
https://www.coastaldcc.co.uk/products/digitrax/loconet-wifi-interface - Base Station
3 x Power supplies (MRBW-WIFI, LNWI, Base Station)
YouTubes
- Introduction to the ProtoThrottle by Thomas Klimoski
- Operating Session on the Seaboard Central by Thomas Klimoski
Notes
- Map the Drive Hold Feature to the Auxiliary Function Button on the upper left corner of the throttle.
- Top right, dynamic brakes, otherwise flange squeal
- Bottom right, coupler noise.
Programming Locomotives
- Make headlights non-directional
- “Using your DCC system set acceleration momentum (CV3) mid-range to moderately high so that the
ProtoThrottle will need to “notch up” to get the train moving.” - “Set deceleration momentum (CV4) high or maximum. This will allow the train to “coast” when the throttle is in the idle position, requiring the use of the brake to slow or stop the train.’
Thinning case